No products

Welcome to 3FVape
Are you 21 or older & of the legal smoking age in your state?
Warning: Some products on this site contain nicotine. Nicotine is an addictive chemical.
The YFTK Typhoon BTD Wave Style RDA is a 22mm rebuildable dripping atomizer which is constructed from 316 stainless steel. It features dual post build deck, single coil configuration and adjustable side airflow. Decorative ring is included.
This RDA comes with bottom feeder pin.
3FVAPE Recommend Products:
![]() | ![]() | ![]() | ![]() | ![]() |
![]() | ![]() | ![]() | ![]() | ![]() |
![]() | ![]() | ![]() | ![]() | ![]() |
![]() | ![]() | ![]() | ![]() | ![]() |
Earn up to $50 through our Product Review Program.
Color | Silver |
Product Type | Rebuildable Atomizer |
Material | 316 Stainless Steel |
Airflow | Adjustable Airflow |
Coil Rebuildable | Coil Rebuildable |
Thread Type | 510 |
Coil Replaceable | Non-Replaceable Coil |
Drip Tip | With Drip Tip |
Package | 1 x RDA, 1 x BF Pin, 1 x Beauty Ring, 2 x Allen Key, 2 x Screws, 2 x O-rings |
Weight | 30g (1.06oz) |
Diameter | 22mm (0.87 inch) |
Depth | 22mm (0.87 inch) |
Height | 30mm (1.18 inch) |
Width | 22mm (0.87 inch) |
Diameter: 22mm;
Height: 30mm;
316 stainless steel construction;
Dual post build deck;
Single coil configuration;
Adjustable side airflow;
Black Delrin drip tip included;
25mm decorative ring included;
Comes with bottom feeder pin;
510 threading connection
3FVape is a professional electronic cigarette retail, wholesale and dropship online shop. We provide new and cool e-cig products at affordable price. We have overseas warehouse for you for fast delivery.
and other questions regarding this product, just contact us. We also encourage you to leave review of e-cig products on 3FVape.
Better than the original
Machining, fit of o-rings is very good. Plus this thing has protruding 510 pins, both for squonking and dripping, so there are no worries to use it with hybrid mechs, for me a big plus compared with the original.
2 features I like very much and cannot be found in many other flavor attys:
- the ultem insert in the top cap, prevents the heat-up of the top cap, even you touch the metal of the top cap with your lips
- The top cap doesnt rotate freely , only for a short range to adjust airflow. This makes it comfortable to screw and unscrew the atty on a mod.
Airflow is very smooth. Its not completely open but more or less restricted, depending on your adjustment of the top cap. I would compare it with the Hadaly, also the flavor is on the same very high level.Try some desert liquids with this, for example custards, they taste really exceptional.
I would not go lower than 0.2 Ohm, below the atty has not enough air and the vapor gets pretty hot and flavor gets muted.
There is really not much negative to say, maybe the non-standard drip tip, so you have not much to choose, but i am ok with the delivered one.
Overdripping might be an issue, the juice well is small, even oversquonking might happen, due to the pretty small juice well.
But all in all one of the best single coil drippers/bf attys I know.
Flavor banger!!
This clone is probably the best single coil flavor rda
Smooth airflow
Finish overall is perfect
Clean and not smell
Good o-ring and screws
Fantastic flavor with dense vapors
If you are taifun fan and you don't want to spend more than 120€, try it
Taifun, you done it!
P.s please don't think you will be smart and buy the shenray ultem caps, will not fit, they are too short
Amazing
For me the best squonking RDA of 2018,and i got a lot.
The machining of this little beauty is great.Perfect O-rings,finish and it squonks and sucks back perfect.Draw is smooth from open to light restricted and the flavour is great.Because of the inner ultem piece the top cap doesn’t get hot at all.I run it with a Hybrid Alpha Braid Coil with 0.4 Ohm and 34 Watt.
As a german i normaly has to go for the original but there‘s no need to.Yftk did great job on this