The Ultimate Atomizer!

Wow. 1:1 clone right down to the packaging
When I put a build in and started vaping - Amazingly smooth, quiet, and delicious!
Best vape ever
Just clean with hot water and be sure to wipe (paper towel) thoroughly
small thing to ask for this
Juice flow control, air flow, and usability is outstanding!
I was a bit nervous that it might be a little too tight of a draw. No... it's wonderful!
Very well packed and shipped

• 2 out of 2 people found this review useful.

Kayfun prime argento

Ordinato il 28.12.2018 arrivato il 18.01.2019, soddisfatto. Il prodotto sembra proprio l'originale nei materiali e nella qualità costruttiva. Immediatamente smontato e lavato in tutte le sue parti. Una volta asciugato ho provato immediatamente ad amarlo con una Coil Kantal A1 28 gauge. Resistenza a 1.052 ohms. Atomizzatore che non perde una goccia, aroma presente, l'unico inconveniente presente è quello di un leggero sentore metallico al tiro, spero vada via dopo un po' di utilizzo. Complessivamente un buon prodotto e un ottimo servizio di 3fvape.

Best MTL i've tried

The quality of this clone is impeccable the machining is perfect i can't see how the original could be any better made.
I have quite a few MTL Rta's including the Siren v2, berserker, kayfun lite to name a few none of them compare to this it's also leak free which is a huge plus.
when mine arrived it had a strong smell of machine oil so be sure to give it a good clean before using it.
it arrived within 7 days of ordering it to the Uk i was very impressed this was with the free delivery which says 10-40 working days.
will definitely be ordering more from 3Fvape! 5/5

• 4 out of 4 people found this review useful.

Sxk KF Prime Style Rta

Доставка заняла 2 недели! Упаковка прямо оригинал, качество изготовления просто супер! Я доволен на все сто процентов! Берите не пожалеете!!!

Very disappointing for an SXK clone

Disappointing for an SXK clone. I had the KF5 from SXK and it was great but this one not so great.

pros
- good throat hit

cons
- lacking flavour compared to others such as the berserker etc. Tried many builds still not up to par.

- leaks at the top cap, leaks at the base. constant gurgles. 3rd party o-ring set did fix this. Extra $$ and this should not leak all over the place out of the box.

- airflow is BAD. I've seen the other review and it's possible I got a dud but I have read other review for the SXK with the same problem with airflow. setting 1-3 is OK, setting 4-6 whistles, annoyingly so. the only way to stop the whistle is to move the airflow ring up just a tiny bit. I've looked closely at the airflow assembly and my conclusion is the airflow holes have been drilled too high on the base section. Also the airflow steps (1 to 6) are not consistent ie: 1 should be the tightest, and 6 should be the airiest. 1-3 (again) are fine. 4 is tighter than 3 though and it's supposed to be looser. Little difference between 5 & 6 is anything.

Overall really disappointed with this one.

• 4 out of 4 people found this review useful.

Not so great in my opinion

Disappointing for an SXK clone. I had the KF5 from SXK and it was great but this one not so great.

pros
- good throat hit

cons
- lacking flavour compared to others such as the berserker etc. Tried many builds still not up to par.

- leaks at the top cap, leaks at the base. constant gurgles. 3rd party o-ring set did fix this. Extra $$ and this should not leak all over the place out of the box.

- airflow is BAD. I've seen the other review and it's possible I got a dud but I have read other review for the SXK with the same problem with airflow. setting 1-3 is OK, setting 4-6 whistles, annoyingly so. the only way to stop the whistle is to move the airflow ring up just a tiny bit. I've looked closely at the airflow assembly and my conclusion is the airflow holes have been drilled too high on the base section. Also the airflow steps (1 to 6) are not consistent ie: 1 should be the tightest, and 6 should be the airiest. 1-3 (again) are fine. 4 is tighter than 3 though and it's supposed to be looser. Little difference between 5 & 6 is anything.

Overall really disappointed with this one.

• 1 out of 1 people found this review useful.

SXK Kayfun Prime

excelent leakproof atomizer.there is a thing going on with the o-rings,you have to get the authentic ones but after that it works perfect,doesn't leak and has smooth airflow.the machining is perfect.It is not as tight as the Berserker but tight enough for a nice MTL draw.

• 2 out of 2 people found this review useful.

Perfect clone

All the logo’s are there, treading is excellent .. good o rings .. and the taste mtl is beautifull.
Best mtl tank I have so far, I have berserker and siren 2 but sxk kf prime is the best!

• 7 out of 8 people found this review useful.

Faithful Reproduction

If you like the Prime, you will like this. The atomizer is an accurate reproduction right down to the engraved logos, including the logos and numbers on the bottom plate. Shipping to the middle of the USA took 11 calendar days after the order date.

• 7 out of 7 people found this review useful.

highly recommended

my best kayfun clone so far. have some k5 clones from different manufactors, used with
the the original mtl-kit, but this one is best. very well machined.

needs a good wash, to get rid of the oil, but after that, it is great.

• 6 out of 6 people found this review useful.

kf prime

la finition est parfaite
mais je suis trés deçu de l odeur métalique
je l ai laver plusieurs fois rien a faire
atomiseur inutilisable
vraiment deçu de sxk

• 0 out of 1 people found this review useful.

Awesome!

Awesome clone! All logos, additional SS tank. I love it!

• 2 out of 2 people found this review useful.

great clone from SXK

the best ato MTL ... with the Coppervape Skyline, the two are making the perfect pair, you don't need anything else... just go for it if you are a MTL vaper.
both of them are amazing.... my heart swings between them

• 3 out of 4 people found this review useful.

Very nice!

My SXK Kayfun Prime Clone works very well with no leaking. Mine came with logos. A broad range of airflow adjustments are allowed, but all are within the scope of a tight cigarette-like draw.

• 7 out of 7 people found this review useful.

SXK KF Prime

Отличный клон! Мне пришел с гравировками, качество Очень высокое! Парить одно удовольствие. Всем советую.

• 4 out of 4 people found this review useful.

stellar

the best mouth to lung flavour-RTA!

• 3 out of 4 people found this review useful.

YES! This has the logo on the chimney

Great clone, best MTL Kayfun so far. Had this for a week already and can’t put it down.

• 6 out of 7 people found this review useful.

Good Product but...

The quality is very good, but only the topcap have a problem, the hole for the Driptip is to small.

• 4 out of 7 people found this review useful.

Sxk Kf prime

Is there logos on this rta, will buy if got logos on this rta

• 4 out of 8 people found this review useful.

SXK KF Prime RTA

SXK Prime have the Atomizer Logos ????

• 6 out of 11 people found this review useful.

Logos

Are there logos on this atomizer?

• 15 out of 31 people found this review useful.