No products

Welcome to 3FVape
Are you 21 or older & of the legal smoking age in your state?
Warning: Some products on this site contain nicotine. Nicotine is an addictive chemical.
The Tripod Style RTA is constructed from 316 stainless steel. The Tripod Style RTA features 22mm diameter and 2ml juice capacity.
Please adjust the upside chimney till the vertex of the both triangles to align to each other, and then you can open the chimney (check the last iamge).
Other Color:
![]() |
3FVAPE Recommend Products:
![]() | ![]() | ![]() | ![]() | ![]() |
![]() | ![]() | ![]() | ![]() | ![]() |
![]() | ![]() | ![]() | ![]() | ![]() |
![]() | ![]() | ![]() | ![]() | ![]() |
Earn up to $50 through our Product Review Program.
Color | Silver |
Product Type | Rebuildable Atomizer |
Capacity | 2.0ml |
Material | 316 Stainless Steel |
Coil Rebuildable | Coil Rebuildable |
Airflow | Adjustable Airflow |
Thread Type | 510 |
Drip Tip | With Drip Tip |
Coil Replaceable | Non-Replaceable Coil |
Tank material | Glass |
Package | 1 x RTA, 1 x Pack of Accessories |
Weight | 56g (1.98oz) |
Diameter | 22mm (0.87 inch) |
Depth | 22mm (0.87 inch) |
Height | 39mm (1.54 inch) |
Width | 22mm (0.87 inch) |
Diameter: 22mm
Juice capacity: 2ml
Material: 316 Stainless Steel
510 threading connection
Single coil build deck
3FVape is a professional electronic cigarette retail, wholesale and dropship online shop. We provide new and cool e-cig products at affordable price. We have overseas warehouse for you for fast delivery.
and other questions regarding this product, just contact us. We also encourage you to leave review of e-cig products on 3FVape.
All the sizes are measured manually, please allow tiny differences due to manual measurement, thanks.
Mr.B tripod RTA
This tripod in my opinion is perfect all you need in one it works well looks great and the machining is perfect I would definitely recommend 10 out of 10
Kopasz
Jó rta finom ízekkel
Very Good.
aside the "engravings", I think is identical with my ulton tripods. maybe not the pole insulation, but if one had to, could make it fit.
I wish I had more than one tank extension for tripod rta. I have one left and that tripod is in use daily. the reason I don't like to use is the standard tank. I don't know how the explain it, but I'm sure the larger tank adds a lot more than volume to the tripod rta. everything runs better with the larger tank. I can overlook its flaws as a daily driver, with the tank extension.
Standard tank has a joke volums, runs slower therefore, looks shit
How about the tank extension ?
Will it be also produced ?
Excellent tank. Appears to be 1:1 clone
Please note this review is coming only from a strict MTL perspective. I do not know how this performs in DL.
Machining and flavour are outstanding from the get go. Eclipses or matches Dvarw in flavour. Can also go tighter.
Has the chimney reducer for those interested in DL although a little hard to remove the first time.
Reviews suggested the wicking is very forgiving. I tested this and not quite so. Likes a Kayfun Prime build for best flavour for MTL with wicks lightly touching bottom of tank and well trimmed and brushed out.
Pros
Topnotch flavour. Not sure it gets better than this - provided you wick right.
Excellent build quality and machining.
Spare glass.
Easy to build and deck screws are great
No leaking, dry hits. Gurgling only when wicking is not spot on.
Cons
Can be fiddly and juice flow can easily be moved accidentally so keep an eye out.
Once Juice is in the atty it can be difficult to see the arrow hiding inside the juice flow control hole which gives you access to the deck. The topcap can be a pain to remove too as it can be hard to see the bottom indicater.
The juice flow holes are a little small and it is also difficult to tell when the tank is almost full so this invariably leads to overfilling which can be messy as there is no lip on the fill deck to hold the juice in place. I usually have to wash my hands after refilling.
The black drip tip can be tricky to remove so you can insert your own drip tip( which is necessary as it is too short unless you want to suck the topcap). It is made of two parts so you need to turn bottom and top in opposite directions to open.
The tank has gotten very hot on occasion,mainly with chain vaping.
There is a learning curve with this tank and it's not as straightforward as a Dvarw or as well designed in functionality as the Prime.
That said if you can get past the cons the flavour and draw are amazing which make this a worthy addition. For the price it is a no brainer and will probably be one or the top atty you own. Because of the cons though I would not consider buying an original until they make changes to its functionality.
Not actual 1:1 But still awesome quality and vape!
The build quality and tolerances are great but the chimney is a one piece..the chimney port does not detach and there is no removable chimney reducer. Other than that, the draw is great and the flavor is AMAZING.
Get it while you can
I was very excited to get this rta specially after watching jai haze review.
Over all I wasn’t disappointed.
Although am not sure if this is the ultron version it’s still a pretty damn good clone. Unlike the pics it comes with both black upper and lower sealing gasket around the glass + spare glass, 4 sure flow inserts and a bunch of o-rings and screws.It has a weight to it, feels substantial and not cheap at all. Well polished with no scratches on it.
Surprisingly this is one of the few clone that got the o-rings tolerance on point. Top cap is looser than the chimney section and the chimney section is looser than the bottom afc. Which means you don’t have to hold the tank while opening the cap before refilling.All metal components are well beveled with no sharp edges.
Drip tip although it’s comfy but not my style. Am using my own 510 tips on it.Filling this thing, building and wicking is a breeze.
As you all know you get 4 different af inserts from 1mm to 1.8mm.
As I prefer restricted lung hit I had to drill the 1.8mm insert up to 2.5mm and it worked great.
Thanks to the large liquid flow ports non of my coils struggled to wick (single and Clapton coils). You got enough room between the posts to go crazy with your build, nothing more than 3mm diameter though.
Flavor is above average with straight wires build, but with Clapton’s it’s over the top.
I didn’t remove the chimney reducer yet as my goal is always flavor over clouds.
In my opinion it has better flavor than dvarw rta. Imaging kayfun v3 flavor but with a beefier coil and more cloud.
The main advantage is this thing is very versatile, mtl, restricted dL, direct dl.
I own over 40 rta’s and the tripod made it to my top 3 rta’s along with kf v5 and dvarw dL rta.
If you can spare the 14.99$ I think it’s worth the investment.
Very impressive rta.
Tripod ulton version?
Hello 3fvape,is thus the ulton version please,because i order it,andulton is almost 1:1
Greetz
Dave