No products

Welcome to 3FVape
Are you 21 or older & of the legal smoking age in your state?
Warning: Some products on this site contain nicotine. Nicotine is an addictive chemical.
The Icarus Style BF Squonk Mechanical Box Mod is constructed from resin with stainless steel connector. The mod has an inner bottle for bottom feeder, with a large capacity of 8ml. It is powered by 1 x 18650 battery (not included) and very easy to use.
The bottle is made from PE.
Other Color :
![]() | ![]() |
Replacement Cover Plates :
![]() | ![]() |
Replacement Bottle :
![]() | ![]() | ![]() | ![]() |
Replacement 510 BF Connector :
![]() |
Earn up to $50 through our Product Review Program.
Color | Random Color |
Product Type | Mechanical |
Compatiable Battery | 18650 |
Material | Resin |
Thread Type | 510 |
Variable Voltage (VV) | No |
Battery Type | Interchangeable |
Telescoping Mod | No |
Variable Wattage (VW) | No |
Package | 1 x Mechanical Mod |
Weight | 80.6g (2.85oz) |
Depth | 47mm (1.85 inch) |
Height | 78mm (3.07 inch) |
Width | 26mm (1.02 inch) |
Resin material constructed;
Powered by 1 x 18650 battery (not included);
E-juice capacity: 8ml;
Compact design and smooth feeling;
Easy to carry and use
3FVape is a professional electronic cigarette retail, wholesale and dropship shop. We provide new and cool e-cig products at affordable price. We have overseas warehouse for you for fast delivery.
and other questions regarding this product, just contact us. We also encourage you to leave review of e-cig products on 3FVape.
Still happy with this mod
Update,Iv been using this now for over 2 months. The square bottle ,that is sold here fits perfect .You will have to trim the hose . Also i found if you go bellow .30 Ohms ,The mod will start to deform,Where the 510 connector is. These low Ohm builds cause the Fat Daddy to get hot,Thus causing the deforming . I know that FD webpage says not to do low Ohm builds .Just playing around with this mod. Chain vaped the hell out of @ .11 Ohms. If it does start to deform. I found a quick ez fix. Just use your stove top to heat the mod by the 510,Then press it flat on a table top .Fixed . Do get the square bottle, For a few bucks they works great....
Details...People Keep asking about...
People keep asking about the contacts and someone states they are copper and silver plated...Wrong.
The primary contacts are SS. There is one contact added to the bottom of 510 that is silver plated on the v1.5 and yes these resin ones are the v1.5 as well.
I have had n o issue with loose or crappy 510 connections. I was able to easily tighten mine with the bolt located inside the box. Don't know what that other dude's problem is.
Door rattle on almost every single one but with very little ingenuity it can be fixed. I used one of those liquid plastic pens that hardens the liquid plastic in seconds after exposing to UV light on other end of pen.
Yes, the bottles are rather hard and should be replaced.
I made silver plated contacts from thin strips of .999 silver. Easily achievable with the resin box as you can sand out the inside to make room for the additional width the silver plates use. I would recommend 30 or 34 gauge plates . No glue or welds needed as you will simply wrap them around either end and the edge and then crimp down with a pair of needlenose.
Great little Mod
I think when they say random color ,they mean the pattern of the resin .The one i received was just like the picture. The 510 is self adjusting with no leakage,due to the small O ring .The switch throw is tight,so you can put this in your pocket and not wounder if its going to fire. The doors are tight fitting,no rattle . Bottle is hard,but thats to be expected at the price. So i would recommend buying the soft bottle for 6.99 at the same time.Fit in nice and tight .Overall its a great buy at 27$.
ok l
va bene modficato 2 cose òamelle e boccetta e va da dio
IS THIS V1.5 IN RESIN OR V1 IN RESIN???
IS THIS THE V1.5 in resin or the v1 in resin??? I know the Icarus v1.5 came out before this with all the issues fixed from the v1 so I can't imagine this being a resin v1 but I still have to ask??
Contacts
The contacts will be silver plated copper just like every other clone mod
CONTACTS ???
What are the CONTACTS made off ? This is stuff you need to know , and not just for this mod, for ALL of them ! If you don't know maybe you should find out .
Icarus Style BF Squonk Mechanical Box Mod - Random Color, Resin,
oui pourquoi random couleurs moi je veux la bleue !!!
could have been authentic
all this company had to do was call it something different and they would have had an authentic
No random colors please!
We need to be able to choose the color of our mods.
You can have the mods in several colors and name them "blue", "brown", "pink", "green" even if the name doesn't really adapt to the color, what I don't want is a green or brown mod because it was a random pick by some guy sending this to us, I want to have a say in that.
If you don't do that most people will not buy these mods, when instead you could have the whole list filled in a couple of days.
510 is horrible
Please advise manufacturer to change 510. The 510 is not secure it moves around and will eventually fall out. What type of QC is thos. I just got my icarus and it's not safe to use.
Why Random Colors
Why the random colors. We the people do not want to buy random colors. Make listings for each color and let us decide what color we want. This random color listing just makes people not want to buy the product.