My Cart (0 Items)
$0.00
No products
Free shipping! Shipping
$0.00 Total
Welcome to 3FVape
Are you 21 or older? You must be 21 or older to enter our website.
The SMOKTech TF-RDTA S2 DECK is suitable for SMOKTech TF-RDTA atomizer. You can rebuild the coil head with different wires.
Warning: Coils must be checked for resistance before they are fired on a device, and re-checked periodically to ensure the resistance remains the same.
Warning: Coils must be checked for resistance before they are fired on a device, and re-checked periodically to ensure the resistance remains the same.
3FVAPE Recommend Products:
 |  |  |  |  |
 |  |  |  |  |
 |  |  |  |  |
 |  |  |  |  |
- Write a review
Earn up to $50 through our Product Review Program.
Data sheet
| Brand | Smoktech |
| Model | TF-RDTA S2 DECK |
| Color | Silver |
| Product Type | Coil Head |
| Material | Stainless Steel |
| Package | 1 x TF-RDTA S2 Coil Head |
| Weight | 8g (0.28oz) |
| Depth | 24.5mm (0.96 inch) |
| Height | 23mm (0.91 inch) |
| Width | 24.5mm (0.96 inch) |
More info
HOW TO BUILD THE TF-RDTA S2 DECK:
1. Before starting make sure your hands are clean.
2. Taking the TF-RDTA S2 deck apart.
3. Installing the pre-wrapped coil.
Insert one end of your coil into the left-side holes, and the other end into the right-side holes.
4. Positioning and cutting the exceeding ends of wire off. Make sure the coil is fixed and lined up with the air hole, and also make sure the coil is NOT touching the deck. Then cut the exceeding ends of wire off.
5. Cutting a strip of cotton and make sure its just larger than the coil you built.
6. Inserting the cotton, and placing it in the middle.
7. Then guide the ends of cotton wick through the holes below.
8. Cutting the ends and make sure its not too short and not too long.
9. Wet the coil with your and adjust the wick.
1. Before starting make sure your hands are clean.
2. Taking the TF-RDTA S2 deck apart.
3. Installing the pre-wrapped coil.
Insert one end of your coil into the left-side holes, and the other end into the right-side holes.
4. Positioning and cutting the exceeding ends of wire off. Make sure the coil is fixed and lined up with the air hole, and also make sure the coil is NOT touching the deck. Then cut the exceeding ends of wire off.
5. Cutting a strip of cotton and make sure its just larger than the coil you built.
6. Inserting the cotton, and placing it in the middle.
7. Then guide the ends of cotton wick through the holes below.
8. Cutting the ends and make sure its not too short and not too long.
9. Wet the coil with your and adjust the wick.
3F is a professional retail, wholesale and dropship online shop. We provide new and cool products at affordable price. We have overseas warehouse for you for fast delivery.
If you find a product to be authentic, then it is not a clone. Authentic SMOKTech SMOK TF-RDTA S2 DECK Rebuildable Dripping Tank Atomizer Coil Head - Silver, review, price, shipping
and other questions regarding this product, just contact us. We also encourage you to leave review of products on 3F.
All the sizes are measured manually, please allow tiny differences due to manual measurement, thanks.