Specification:
510 threading connection with copper center pin;
Display: 0.69 inch blue OLED screen;
Variable Wattage: Wattage can be adjusted from 7W to 60W in 1W increments;
Powered by 1 x 18650 battery (not included);
Maximum output voltage: 11V;
Maximum output current: 18.5A;
Temperature control: 200'F~600'F (100'C~300'C) in 10'F increments;
Atomizer's resistance: 0.10~3.0 Ohm (normal atomizer),
0.08~1.0 Ohm (nickel 200 coil);

Features

Screen Reverse for left-hander;
Battery rechargeable directly on mod;
Wattage Range: 7~60W;
Lowest Resistance: 0.10~3 ohm (normal) / 0.08~1 ohm (ni200); Temperature control: 200'F~600'F / 100'C~300'C;
Maximum output voltage: 11V;
Maximum output current: 18.5A;

Basic function:
1) Three buttons: The biggest one is the power button, the other two are the adjusting buttons.
2) Battery Requirements: Put one 18650 battery in the YEP NTC 60W, supply current is more than 18.5A.
3) 5 clicks in 2 seconds comes to working condition, the screen will show "YEP" and change to show "System ON" after 2 seconds.
4) Output power adjustment: Press the "+" button one time, the output power will add 0.1W. In the same way, the output power will reduce 0.1W by pressing the "-" button one time. Press the "+" and "-" buttons at the same time for a while, it will come to the mode of power fast adjusting.
5) Screen Reverse: Press the "+" and "-" button meanwhile, the screen will reverse. This function is designed for left-hander.
6) Lock the power: Press the power button and "-" button meanwhile, the power will be locked / unlocked.
7) Lock the screen: If you want to save the power, Press the power button and "+" button at the same time.
Protection:
1) Over puffing protection: when over 10 seconds, the power will be off compulsively, OLED will show "long ".
2) Low-voltage protection: when the voltage is below 3.4V, OLED will show "low battery" and the products need to be charged in time, since low battery cannot support normally.
3) 5 clicks the power button in 2 seconds, the screen will show "System ON", 5 clicks in 2 seconds again, the screen will show "System OFF".
4) If there isn't an atomizer attached to it, the screen will show "NO atomizer".
5) Reverse connection protection: when battery is put at wrong direction, it will not cause any damage to control panel with protection. Take out the battery and put it in the right direction, the product will work normally.
6) Short protection: when the resistance of the atomizer is below 0.2 ohm, in order to avoid over-heating, the circuit will have a protection automatically, the screen will show "atomizer short".
7) In the high-power working condition, when the voltage of the battery get too low, and cannot support the high output power, the battery's symbol on the screen will keep "flashing". The system will adjust the output power automatically to ensure the battery can be in normal use when the voltage is over 3.3V.
Battery Charging:
1) Charging input voltage: DC 5V+/- 5%;
2) Charging input current: >800mA;
3) Charging current: 600mA;
4) Different ways for charging:
1. Take the battery out, and charge the battery with the wall charger.
2. Charge it directly by the USB port.
5) The screen will show a big battery icon when the battery is charging, the icon's bar chat will be filled circularly from the bottom to the top.
6) Charging disconnect prompt: the battery icon will disappear when charging is disconnected.
7) When charging is full, the battery icon's bar chart will be full all the time and don't animate circularly.

3F is a professional retail and wholesale shop. We provide new and cool products at affordable price. All products will be shipped from China now. If you find a product to be authentic, then it is not a clone. For any question about product title Authentic YEP NTC 60W Temperature Control VW Variable Wattage APV Box Mod - Black, Aluminum, 7~60W, 1 x 18650, please contact us. We also encourage you to leave review of products on 3F.