Sale
Authentic Wismec Theorem RTA RDTA Rebuildable Dripping Tank Atomizer, Stainless Steel +Glass + Detachable Structure

More views

Authentic Wismec Theorem RTA RDTA Rebuildable Dripping Tank Atomizer, Stainless Steel +Glass + Detachable Structure

8616

Availability: Out of Stock. Click Notify Below.



$21.99

$10.99

-$11.00

The Authentic Wismec Theorem RDA Rebuildable Dripping Atomizer utilize an Open Wicking System, a combined Top Airflow Plug and a Solid Leakproof Sleeve Design. Removing the glass sleeve from the deck exposes the build area making it completely accessible and easy to install both cotton and coils. Removing the Top Airflow Cap simultaneously exposes the fill port, allowing the user to easily refill the Atomizer without alerting their airflow settings. The Theorem Atomizer is made of stainless steel, and all the components are convenient to detach and clean.

Replacement Coil:

Authentic Wismec NotchCoil 5 PCS 0.23 Ohm coil for RBA Atomizer

Replacement Drip Tip:

15mm Silver SS Drip Tip for Wismec Theorem RTA Rebuildable Atomizer

Replacement Tank:

Transparent Replacement Glass Tank for Wismec Theorem RTA Atomizer Silver Stainless Steel Tank for Wismec Theorem RTA Atomizer

Earn up to $50 through our Product Review Program.

Data sheet

BrandWISMEC
ModelTheorem Atomizer
ColorSilver
Product TypeRebuildable Atomizer
MaterialStainless Steel
AirflowAdjustable Airflow
Coil RebuildableCoil Rebuildable
Thread Type510
Coil ReplaceableNon-Replaceable Coil
Drip TipWith Drip Tip
Package1 x Theorem Atomizer, 2 x Airflow Control Rings (single and dual), 1 x Stainless Lined Glass Sleeve, 1 x Glass Sleeve, 2 x NotchCoil with Cotton, 3 x Silicon O-rings (Cyan), 4 x Screws, 1 x Hex Key 1.25mm Drive (0.05 in), 1 x User Manual
Weight45g (1.59oz)
Diameter22mm (0.87 inch)
Depth22mm (0.87 inch)
Height46.25mm (1.82 inch)
Width22mm (0.87 inch)

More info

Main Features:
Stainless Steel Material & Detachable Structure: The Theorem Atomizer is made of stainless steel, and all the components are convenient to detach and clean.
Optional Atomizer Tube: In addition to the transparent glass tube which presents all inner components and level clearly, the optional steel tube will bring you a different visual enjoyment.
Innovative Top Filling: Removing the Integrated Top Airflow Cap and Plug simultaneously exposes the fill port, allowing the user to easily refill the tank without alerting their previous airflow settings.
Convenient Airflow Control: By rotating the airflow control ring clockwise or anticlockwise, you can adjust the airflow and enjoy wonderful . Moreover, the optional airflow control ring will bring you different experiences.
Brand-new Notch Coil with Cotton: Apart from the equipped NotchCoil with Cotton, the users can also rebuild the coils to their preference and enjoy the fun of DIY.

Standard Configuration:
1 x Theorem Atomizer
2 x Airflow Control Rings (single and dual)
1 x Stainless Lined Glass Sleeve
1 x Glass Sleeve
2 x NotchCoil with Cotton
3 x Silicon O-rings (Cyan)
4 x Screws
1 x Hex Key 1.25mm Drive (0.05 in)
1 x User Manual

 

3F is a professional retail, wholesale and dropship shop. We provide new and cool products at affordable price. We have overseas warehouse for you for fast delivery.

If you find a product to be authentic, then it is not a clone. Authentic Wismec Theorem RDA Rebuildable Dripping Atomizer, Stainless Steel +Glass + Detachable Structure, review, price, shipping

and other questions regarding this product, just contact us. We also encourage you to leave review of products on 3F.

 

Reviews

Grade 
Gabriel R 11/30/2018

I see why is so cheap

This is not about pros or cons, just facts:

- Nearly impossible to fill with needle bottle, find something with a long tip.
- One you set the airflow you have to almost take it apart to adjust again.
- Careful when you take the "cap" off to fill, you might end with the glass in your hand too, spilling all .
- Takes some practice to find the perfect length of the wick.
- Not spill proof
- Not sure I love the , have been using the same for a while so believe me, I know how it taste's
- Beautiful
- Easy to install coils

    Grade 
    Sylvain O 07/24/2016

    A must: It's a RTA very near of a RDA

    Fantastic clouds, savors and easy to coil.
    One of my favorite RTA.
    The notch coil is a killing, you must built the theorem only with the a notch coil, he is built for that purpose. If for you the quality of restitution of the savors of your is important and the quality of your cloud also: the Theorem is for you.

    • 0 out of 1 people found this review useful.
    Grade 
    simon m 05/31/2016

    Wismec Theorem - Good Atty

    So just received mine, and i must say the is good to great. Almost verging on good RDA's. The notch coil was surprisingly good, although a little touchy, produces hot fast and ramps up faster (recommend dropping the watts for this one). Asides from that really quite good. I tried my own build, 5 wrap, 3mm ID, 2*26AWG claptoned with 32AWg Kanthal, and although really good i still think the notch is better.
    The stock drip tip creates a tighter draw but too hot for my liking so switched it for a teflon and really enjoy that combo now. For the price i would absolutely recommend.

    As for the finicky airflow design, once its set you don't need to touch it again, so not really an issue.

    • 2 out of 2 people found this review useful.
    Grade 
    Nicholas m 05/14/2016

    1 week follow up

    Here's a follow up after a few days. I've been using this atty approx 50% of the time and I'm really starting to like it.
    I took the original wick out and pulsed and doused the notch coil. It glowed very evenly from the middle out with no hot legs. These coils really do ramp up fast.
    I reworked it a bit looser through the coil than what they had in there originally. Also cut a diagonal on the end of the wick. kept length a couple of mm off the bottom.
    It wicks brilliantly. Can take a few strong pulls and watch the flow up the wicks.
    Tried all the airflow variations. The double airflow is just too airy for me. It works well but I like it a bit more constricted. Closing down the double airflow to half does work nicely.
    Single airflow over the coil is what i prefer. It's not as hot as it is over the chamber reducer thingy and i prefer that.
    I noticed no significnat differences in the various airflow options. There are some, with the single over the reducer being the best by a very small margin, but the increased heat turns me off.
    Anyway, next step is to put a clapton in here and see how that goes.
    At this point I'm seriously considering buying another.
    I can now highly recommend.

    • 6 out of 6 people found this review useful.
    Grade 
    Nicholas m 05/05/2016

    First Impressions

    Ok, got my Theorem this morning.
    Here's the unimportant stuff:
    Well packaged, everything included.
    Container it comes in smells like death, toxic death. Since I quit my sense of smell has returned...today that's a bad thing.
    It's a damn good looking tank.

    More important stuff:
    Driptip is small, tiny actually. I will be replacing it.
    Tank is well built. Threading is fine, o-rings are strong. Deck posts are secure. Grubs are good.
    Screwing on the top while holding the airflow ring is fiddly. Not cuss-worthy but I do consider it lazy engineering .

    First use:
    I decided to use the included notch coil and wick for the first impression.
    Notch comes out at 0.26
    Wick is waaay too long so I cut it so it sits approx 2mm above the bottom of the tank.
    Placed the wick in the slots then d it up.
    Using a standard dropper tip it was fairly easy to place the through the fill hole. Obviously a needle type tip would be preferable but it's really no problem with a dropper.
    I used the single airflow ring and placed it above the chamber reducer thingy or whatever the hell you call it.
    After the wick was wet I moved it ever so slightly from the side of the wick channel to addd some air.

    d:
    For me, i found the sweet spot was 45w
    It wicks well, no problem with dry hits.
    It drinks like I drink Guinness on jam night at the pub...which is significant.
    I had no bad taste from the notch.
    Good vapour production
    Good , not great but good.
    Condensation builds up immediately so you can't really see in after you .
    Tank gets hot if you chain.
    I used an 80vg 20 pg .

    That's it for now. I'll continue to experiment with different builds and airflow options.
    Would I buy it again? Don't know yet.

    • 9 out of 9 people found this review useful.

    Write your review !

    Write a review

    Authentic Wismec Theorem RTA RDTA Rebuildable Dripping Tank Atomizer, Stainless Steel +Glass + Detachable Structure

    Authentic Wismec Theorem RTA RDTA Rebuildable Dripping Tank Atomizer, Stainless Steel +Glass + Detachable Structure

    The Authentic Wismec Theorem RDA Rebuildable Dripping Atomizer utilize an Open Wicking System, a combined Top Airflow Plug and a Solid Leakproof Sleeve Design. Removing the glass sleeve from the deck exposes the build area making it completely accessible and easy to install both cotton and coils. Removing the Top Airflow Cap simultaneously exposes the fill port, allowing the user to easily refill the Atomizer without alerting their airflow settings. The Theorem Atomizer is made of stainless steel, and all the components are convenient to detach and clean.

    Replacement Coil:

    Authentic Wismec NotchCoil 5 PCS 0.23 Ohm coil for RBA Atomizer

    Replacement Drip Tip:

    15mm Silver SS Drip Tip for Wismec Theorem RTA Rebuildable Atomizer

    Replacement Tank:

    Transparent Replacement Glass Tank for Wismec Theorem RTA Atomizer Silver Stainless Steel Tank for Wismec Theorem RTA Atomizer

    Write a review

    Accessories